Pipes and shaped articles in PUF insulation for heating from the manufacturer. Company Yar-Business Center is specialized in manufacturing and installation of STEEL PIPES BEFOREHAND TERMAL-INSULATED BY FOAMED POLYURETHANE, casings for heating and HDPE pipes for pressure, drinking and technical water supply products that are produced by the technology based on the principle of "pipe in pipe" - a Ukrainian-made steel pipes with diameters from 57 to 1020 mm with the insulating layer (thickness 29 to 70 mm) with effective material - polyurethane foam (PUF) and a shell-tube low-pressure polyethylene with a diameter of 120 to 1200 mm for laying underground or galvanized iron for a land use of such heating pads for laying pipes in heating compared to conventional methods can:

• increase longevity of 2-3
• almost completely eliminate the heat loss
• reduce operating costs for servicing heating in 2 times
• reduce capital costs in the construction of trails 2-3 times
• a system of operational remote control (CCDS) prevents an emergency situation PUF insulated pipes with an outer plastic shell designed for laying pipelines underground non The shell layer protects polyurethane insulation from moisture, mechanical damage, prevents the diffusion of polyurethane and provides a high degree of protection against corrosion. PUF insulated pipes with an outer shell made of galvanized steel, which in comparison with plastic is exposed to ultraviolet sunlight and other atmospheric phenomena, for land laying pipelines.

Pipe pre-insulated PUF (polyurethane foam) for heating systems, heating, deliveries of steam and hot water, Component piping, valves - PRODUCTION, DELIVERY, INSTALLATION, SALES Company YAR-BUSINESS CENTER specializes in the manufacture of insulated pipes and fittings with thermal insulation from polyurethane foam in plastic casing (pipe PPU-P) or membrane made of galvanized steel (pipes PPU-O) for channel-free or aboveground heating pads or piping hot and cold water pipes pre-insulated PUF and fittings for heating systems used for construction and repair of heating systems, designed for normal operation when the coolant parameters: nominal pressure PN is more than 2.5 MPa and a temperature in May is over 140 ° C in continuous operation and short-term peaks increase in temperature to 150 ° C for not more than 10 days cumulatively during the year PUF insulated pipes with an outer plastic shell designed for underground channel-free laying of pipelines The shell protects the layer of polyurethane insulation from moisture, mechanical damage, prevents the diffusion of polyurethane and provides high protection against corrosion. PUF insulated pipes with an outer shell made of galvanized steel, which is compared to the plastic is exposed to ultraviolet sunlight and other atmospheric phenomena, for land laying pipelines.

Depending on the diameter of the shell has a thickness of 0,55-1,0 mm, has high strength and casting components for guaranteed withstand pressure polyurethane foaming. Ltd. "Yar-BUSINESS CENTER" supply pipe in isolation PPU, in complete, including all the necessary details of conduits (outlets in the PPU, PPU transitions, tees in the PPU, fixed panel supports, channels impassable, bellows expansion joints, sliding resistance, shrink belt, cuffs.

I present our company is a Tulsi brass industries. Tulsi Brass Products is an established name associated with the Manufacturing and Supplying of a wide assortment of products, producing all kinds of:

brass nuts, bolts, brass insert, brass slive, brass terminals, brass anchor fasteners, brass connectors & other brass components as per the customer drawing and specification.

The wide range of products can meet all electrical installations requirements.

We have been doing business from last 20 years in this field of brass related products and export our products to all over the world.

We are one of the largest factories for slewing bearings in China. We can supply our customers with large size slewing bearings, the diameter more than 200 mm. Our products are sold all around the world.

Our company produces these products at its own factories in Kayseri/Turkiye:

- Welding wire: ER70S6 Sg2 Gas Shielded Welding Wire. 0,8-1,0-1,2-1,6 mm diamaters. Net 15 kg plastic or wire spools, precious layer.

- Steel Spring Wire : Low carbon (45-65) steel spring wire suitable for mattress springs. From 1,3 mm to 5,0 mm diameter.

- Household Products : High quality, first class ironing boards, clothes drying racks, step ladder, wheeled carrier etc.

We want to sell our products to abroad and looking for serious companies for this.

We produce wire mesh fence, Weld Mesh Fencing, fencing wire, welded mesh wire, Paladin Fencing, Double Wire Fence, 358 Security Fencing, Euro Fence, Temporary Fencing, Chain Link Fencing, Chain Link Fence Parts, Twin Wire 868 Fencing, Field Fencing, Fence Post, Welded Wire Mesh Panel, Reinforcing Steel Mesh, Concertina Barbed Wire, Barbed Wire, Welded Wire Mesh, Gabion, Chicken Wire, steel grating, concrete welded mesh, phosphor bronze wire mesh, crimped wire mesh, decorative wire mesh, conveyor belt mesh, gabion box and gabion mesh etc.

We have exported nearly 10 years to France, USA, Canada, Australia, Japan, Sweden, etc.

We sincerely hope to cooperate with you.

Thank you!

Our company OJSC "Artyomovsk Non-Ferrous Metals Processing Plant", created in 1954, is the leader for production of non-ferrous goods in Ukraine, produces more than 1000 nominal sizes of copper alloys. Our non-ferrous products are produced according to international standards and completely meet requirements of our customers. Our products are known in such countries as Germany, Italy, Poland, Turkey, Greece, England, Slovakia, in some Far East countries and others. Our official site is www.azocm.ua

We are Slovak industrial company focused to production of metal parts. We offer complete CNC services, welding, sheet and tubes forming and surfacing. Our partnership is based on quality-price-timing.

We are suppliers, machinists, fabricators of all refractory metals. We can supply Molybdenum, Tantalum, Tungsten, Niobium, Zirconium, Niobium, MoLa, W/Ni/Fe, W/Ni/Cu, in all forms, rods, sheet, plate, foils, wires, nuts, studs, or any part made to drawing.

We are the biggest hot dip galvanizing plant in Ukraine. We could produce metal goods for you, zink them in our plant and sent them to you.

Eigen (pronounced Eye Gun) is a unit of KDDL Ltd, belonging to Saboo Business Group and head quartered at Chandigarh, India. (Eigen Unit is located at Bangalore, India and is ISO 9001:2000 certified. TS 16949 and AS 9100 are under implementation.) Eigen designs and develops press tools and supplies precision sheet metal components (stamped/pressed parts) to various companies around the globe mainly concentrating in automotive, electrical, electronic, telecom, instrumentation, aerospace and medical sectors. The group has factories in Bangalore, Derabassi, Parwanoo and Switzerland and is listed in Mumbai Stock exchange as KDDL Ltd.
We design and develop press tools/dies and manufacture stamped components in thicknesses starting from 0.05mm and use materials like Stainless steel (various grades), Phosphor Bronze, Brass, Cu, Beryllium Copper, Copper Nickel, Maillichart, Mumetal, Magnetic Iron, Nysilver, Mylar, CRCA, HRCA, Silver Clad, Aluminum, Phynox, Inconel, Silver Magnesium Nickel, Spring steel, Telcon, Titanium, sandwiched sheets and other various proprietary materials. We supply parts with Nickel, Tin, Gold, Silver, Zinc, and various other plating/coatings.

We would like to introduce you our engine parts manufacture.

There are many kinds of spare parts that have been manufactured for different kinds of engines.

Our mission is cheap prices and the best quality.